SHOP ALL

13" Slipper Spring Equalizer for 2" Springs

For 2" wide leaf springs Overall measures 13" long x 3 7/16" tall x 2 3/4" deep Metal thickness .25" Front hole diameter 7/16" Rear hole diameter 9/16" Center hold diameter 7/8"

14125A Bearing Cone 1.2500"

1.2500" ID Industry standard part number: 14125A Commonly used on 7000lb axles Outer bearing

12" x 2" Hydraulic Brake Assembly Left

12" x 2" Brake Assembly 5 bolt mounting pattern Left/driver side Hydraulic Uni-servo Commonly used on 5200lb-7000lb axles.

12" x 2" Hydraulic Brake Assembly Right

12" x 2" Brake Assembly 5 bolt mounting pattern Right/passenger side Hydraulic Uni-servo Commonly used on 5200lb-7000lb axles.

10" x 2 1/4" Hydraulic Brake Assembly Right

10" x 2 1/4" Brake Assembly 4 bolt mounting pattern Right/passenger side Hydraulic Uni-servo Commonly used on 3500lb-4400lb axles.

10" x 2 1/4" Hydraulic Brake Assembly Left

10" x 2 1/4" Brake Assembly 4 bolt mounting pattern Left/driver side Hydraulic Uni-servo Commonly used on 3500lb-4400lb axles.

5 Lug on 4 3/4" Idler Hub 3500lb

5 lug x 4.75" circle bolt pattern Fits many 3500lb axles Races and studs come pre installed in the hub Must be assembled and greased prior to installation.  Bearings and seal are sold seperately. This hub uses 3500lb Bearing & Seal Kit 1 3/8" x...

20 3/8" Double Eye Leaf Spring 1000lb Capacity

20 3/8" from center of eye to center of eye Double eye  1 3/4" wide 1000lb per spring capacity (2000lb per pair) 3 leaf

GS1500DL Grease Seal 1.500 ID 1.987 OD

1.500" ID 1.987" OD Industry standard part number: GS-1500DL Commonly used on 2000-2200lb axles

DL-2125 Grease Seal 2.125 ID 3.376 OD

2.125" ID 3.376" OD Industry standard part number: GS-2125DL Commonly used on 5200-7000lb axles

25520 Bearing Cup Race 3.2650"

3.2650" OD Fits 25580 bearing cone Industry standard part number: 25520 Commonly used on 5200-7000lb axles Inner race

5/8-18 Drive In Lug Stud

5/8"-18 thread size .7" Knurl diameter Drive in 2 11/16" shoulder to tip length 3" overall length