Brakes, Hubs & Drums

#42 Lubed Spindle For 7000lb Axle - W/ Brake Flange - Straight

Weld on Lubed 5 bolt brake flange Capacity: 3500lbs Overall measures: 8.25" Uses bearings / seals: 25580 ID 1.75" 14125A ID 1.25" GS2250DL ID 2.25"

#84 Lubed Spindle For 3500lb Axle - W/ Brake Flange - Straight

Weld on Lubed 4 bolt brake flange Capacity: 1750lbs Overall measures: 6.35" Uses bearings / seals: L44649 ID 1.0625" L68149 ID 1.3775" GS1719DL ID 1.719"

25 1/4" Double Eye Leaf Spring 1750lb Capacity - 4 Leaf

25 1/4" from center of eye to center of eye Double eye  1 3/4" wide 1750lb per spring capacity (3500lb per pair) 4 leaf

25 1/4" Double Eye Leaf Spring 3000lb Capacity - 5 Leaf

25 1/4" from center of eye to center of eye Double eye  1 3/4" wide 3000lb per spring capacity (6000lb per pair) 5 leaf

1 3/4" Nylon Leaf Spring Bushing

Measures: 1 3/4" 9/16" ID Nylon bushing

12 1/4" x 3 3/8" Electric Brake Assembly Left - 7 Hole - Self-Adjusting - 10K

12 1/4" x 3 3/8" Brake Assembly 7 bolt mounting pattern Left/driver side Self adjusting Commonly used on 10,000lb axles.

12 1/4" x 3 3/8" Electric Brake Assembly Right - 7 Hole - Self-Adjusting - 10K

12 1/4" x 3 3/8" Brake Assembly 7 bolt mounting pattern Right/passenger side Self adjusting Commonly used on 10,000lb axles.

12 1/4" x 3 3/8" Electric Brake Assembly Left - 4 Hole - Self-Adjusting - 8K

12 1/4" x 3 3/8" Brake Assembly 4 bolt mounting pattern Left/driver side Self adjusting Commonly used on 8000lb axles.

12 1/4" x 3 3/8" Electric Brake Assembly Right - 4 Hole - Self-Adjusting - 8K

12 1/4" x 3 3/8" Brake Assembly 4 bolt mounting pattern Right/passenger side Self adjusting Commonly used on 8000lb axles.

26 1/2" Slipper Spring With Hook - 3500lb Capacity - 5 Leaf - 2" Wide

Measures approximately: 26 1/2" from center of eye to outside of hook Slipper spring with hook end 2" wide 3500lb per spring capacity (7000lb per pair) 5 leaf

5 Lug on 4 1/2" Idler Hub 2000lb-2200lb -Small Inner

5 lug x 4.5" circle bolt pattern Fits many 2000lb-2200lb axles Races and studs come pre installed in the hub Must be assembled and greased prior to installation.  Bearings and seal are sold seperately. Depending on your spindle size this hub uses...

12" x 2" Electric Brake Assembly Left - Self-Adjusting

12" x 2" Brake Assembly 5 bolt mounting pattern Left/driver side Self adjusting Commonly used on 5200lb-7000lb axles.